multipure water filter


  • The most effective point-of-use water filtration system available today.

  • Removes cysts, lead, chlorine, disinfection by-products, MTBE gasoline additive, PCBs, VOCs and much more.

  • Independently tested by NSF International, the gold standard for verifying filter performance. No other filters carry more NSF approvals.

  • Stainless steel, with a chrome faucet.

Pricing:
Multipure Water Filter
Replacement Filter


$349.99
$44.99

    click to return to styles and colors

  • overview

      the story

      Solid carbon block filtration technology that combines mechanical filtration, electrokinetic adsorption, and chemical/physical adsorption to provide the most effective contaminant reduction possible.

      performance

      Multi-pure is one of the top performing water purification system in terms of removing contaminants from drinking water.

      Only Multi-Pure Drinking Water Systems are certified to reduce one of the widest wide ranges of contaminants in the industry.

      Multi-Pure design has been Certified, Registered, and/or listed by: NSF International and in all states that regulate drinking water treatment devices (including California, Wisconsin, Massachusetts, & Colorado).

      Healthy minerals remain in the water. Flow rate is 1 gallon per minute at 60 psi.

      Next: Health
  • health

    at home

    Removes contaminates from your drinking water, which improves the water quality and your health.

    on the planet

    Removes the need for bottled water at home, reducing your impact on the global environment.

    Next: Use
  • use

    how much do i need?

    Filter capacity is 750 gallons. For an average family, 750 gallons lasts about 1 year.

    Filter life will vary in proportion to the amount of water used and the level of impurities in the water being processed.

    how do i install or apply it?

    We generally recommend professional installation of the undercounter units. Please refer to the Owner’s Manual for installation instructions.

    how do i maintain it?

    Do not allow water to sit in unit for extended periods of time (10 or more days) without being used. If unit is to be left unused for more than 10 days, drain all water from the system and remove the filter. Upon your return, reconnect the filter in the housing and continue use. In the event water does sit in the unit for 10 or more days, the system should be flushed by allowing water to flow to waste for about 3 minutes; then continue use as normal.

    Generally, water flow/velocity will decrease once the filter nears the point of being full. Also, if you remove the filter after a year, and the white filter media is now brown or grey, this is a good sign that it is ready for a change.

    Next: Colors & Styles
  • colors & styles

    Click picture to enlarge
    colors & styles

    Filter Unit

    Filter Replacement

    Previous: Use