biowash stripex-l


  • Low-toxic stripper for exterior wood.

  • Removes oil-based wood stains, sealers and semi-transparent pigmented stains.

  • Contains no bleach, Completely biodegradable.

  • Won’t burn plants if properly applied.

  • Apply with a nylon brush or roller when temperature exceeds 50 degrees F. Wait 15-45 minutes, then scrub and rinse.

Pricing:
Stripex-L

gallon
$24.99

3.5 gallon
$84.99

    click to return to styles and colors

  • overview

    the story

    Srtipex-L removes all oil and common latex deck finishes including solid and semi-transparent stains. Use Stripex-L to restore wood to its natural color and prepare surface for recoating.

    performance

    Bio-Wash Stripex-L has been proven to effectively remove oil-based wood stain sealers, semi-transparent pigmented stains, as well as gray weathered wood, mold, mildew, tannin bleeding and water stains. The water-based formula will not harm surrounding vegetation(if pre-wetted) and is quick and easy to clean-up.

    Next: Health
  • health

    at home

    Stripex-L is safe for use around flowers and shrubs if pre-wetted prior to application. This stripper is biodegradable and easy, water rinse clean up.

    Next: Use
  • use

    where can i use it?

    Wood decks, wood fences, wood railings, wood siding, log homes, and cedar shakes.

    how much do i need?

    Stripex-L covers 75 to 125 square feet per gallon, depending on surface type.

    how do i install or apply it?

    Preparation
    Project surfaces must be dry and warm; above 50*F(10*F). Stripex-L may harm bare metal or painted surfaces. Pre-wet vegetation. Direct exposure to Stripex-L may burn foliage but rinising residue will not harm plants or roots. Shake Stripex-L well before using.

    Application
    Apply with a nylon brish or a roller evenly and liberally to cover wood surface. Apply vertically from bottom to top. Do not allow Stripex-L to dry on wood. Apply in the shade.

    Wait: Allow stripex-L to soften or dissolve the coating. Most applications will require a waiting period of approximately 15 to 45 minutes. The coating residue should easily rinse off when ready.

    Scrub lightly where required. Use stiff brush or floor broom to help remove residue. Work in the direction of grain to minimize "grain raising" on wood surface.

    Rinse wood in direction of grain with water; using a garden hose or a 500-1200 PSI power washer. A power washer will eliminate the need for scrubbing.

    Disposal
    Dispose remaining product in accordance with applicable environmental regulations. neutralize with diluted acid or citric acid.

    Previous: Health