where can i use it?
OSMO Park Lane a stain for wood can be used on any exterior wood including wooden siding, shutters, fences, shingles, sheds, garden furniture and more. It is great for any kind of wood, new or weathered, rough or smooth (though you may need more for rougher wood surfaces).
It is ideal in renewing a previously stained, weathered or discolored wood surface.
Park Lane is great for both exterior and interior wood surfaces.
how much do i need?
One liter of OSMO Park Lane covers 170 square feet per coat on average. Coverage is generally less for the first coat and more on the second coat. Coverage will be less on rough, sawn or striated wood.
Most woods will require two coats, though putting a light color on a dark surface may require 3 coats. For renovation, in most cases, only one coat is needed.
how do i install or apply it?
Osmo Park Lane applies similarly to a water-based paint. You can use a synthetic brush, or roller. Park Lane is also sprayable with a regular or airless sprayer.
Apply generously and swiftly in vertical sections along the wood’s grain. Since it dries so quickly you should not make the sections you are working on too wide.
For best results:
•
•
•
•
•
- Do thorough prep work (stir product well, clean the surface it is being applied to and do a test application to verify how the product will look).
- Apply in temperatures above 41° Fahrenheit.
- Apply to a dry, clean and frost free surface.
- Protect product from freezing.
- Wait a minimum of 3-4 hours before applying second or third coats..
how do i maintain it?
Clean with mild detergents such as AFM Safecoat Super Clean or Biowash Simple Wash.
Recoat and apply as many additional coats as needed.
Next: Colors & Styles