where can i use it?
OSMO One Coat Only is designed for any bare wood surface and is suitable for use on both interior and exterior wood, with the exception of floors and decks. One Coat can be used as a stain color under Osmo Polyx Oil for floors.
how much do i need?
One liter covers approximately 200 square feet.
how do i install or apply it?
PREPARATION
Wood surface must be clean, frost-free and dry (maximum moisture content of 20 percent).
Old paints and varnishes must be removed. Old microporous stains only have to be cleaned.
On new wood, where possible, apply the finish to all sides of the wood before installation. It's easier and neater.
APPLICATION
Stir the finish thoroughly. Don't thin.
Use a stiff brush. OSMO brushes are ideal because of their short bristles. Dip the brush into the well-stirred finish and apply in a very thin coat along the line of the wood grain. Brush back and forth to spread out the stain.
DRYING
Drying takes about 12 hours.
CLEANUP
Clean brushes with mineral spirits or the benzene-free OSMO Brush Cleaner.
STORAGE
Can be stored for five years or longer.
Freezing doesn't ruin this product. If the can freezes, the finish may thicken. But it will regain normal consistency and be ready to use after two or three days at room temperature.
how do i maintain it?
To clean wood finished with OSMO One Coat, we recommend using mild detergents and power washing if necessary.
We recommend recoating OSMO One Coat every 3 to 5 years.
Next: Colors & Styles